| No. | Brand | J | l | F | b | T | H | S | E |
| 77290B | Franke | - | - | - | - | - | - | - | - |
| 66148L | Franke | - | - | - | 60 mm | - | - | - | - |
| 77226B | Franke | - | - | - | - | - | - | - | - |
| 75059A | Franke | - | - | - | - | - | - | - | - |
| 75018A | Franke | - | - | - | - | - | - | - | - |
| 75079A | Franke | - | - | - | - | - | - | - | - |
| 73046L | Franke | - | - | - | - | - | - | - | - |
| 66159L | Franke | - | - | - | - | - | 217.488 mm | - | - |
| 66389L | Franke | - | - | - | - | - | - | - | - |
| 77252B | Franke | - | - | - | - | - | 305.594 mm | - | - |
| 77274A | Franke | - | - | - | - | - | - | - | - |
| 73107L | Franke | 1030 mm | - | - | - | - | - | - | - |
| 68711A | Franke | - | - | - | - | - | - | - | - |
| 77210A | Franke | - | - | - | - | - | - | - | - |
| 74078A | Franke | - | - | - | - | - | - | - | - |
| 66158L | Franke | - | - | - | - | - | - | - | - |
| 69711L | Franke | - | - | - | - | - | - | - | - |
| 68647A | Franke | - | - | - | - | - | - | - | - |
| 68667A | Franke | - | - | - | - | - | - | - | - |
| 74144A | Franke | - | - | - | - | - | - | - | - |
| 75076A | Franke | - | - | - | - | - | - | - | - |
| 66147L | Franke | - | - | - | - | - | - | - | - |
| 73106L | Franke | - | - | - | - | - | - | - | - |
| 68558A | Franke | - | - | - | - | - | - | - | - |
| 68645A | Franke | - | - | - | - | - | - | - | - |
| 73136L | Franke | - | - | - | - | - | - | - | - |
| 68807A | Franke | - | - | 12 mm | - | - | - | - | - |
| 66401L Franke Slewing Ring Bearings | A2:114.3 mm; R1:44.45 mm; Initial grease fill:107.73 g; N1:19.05 mm; P180°:19.1 kN; Cap bolt:2 x 1/2-13 UNC; J max.:241.3 mm; H2:25.4 mm; da:55.563 mm; H:147.637 mm; RG:1/8 NPT; P90°:30.2 kN; Housing:SAF 513; Ca:39.014 mm; Appropriate attachment bolt size G:0.625 in; ba:31.75 mm; Cap bolt, SAE grade:5; J min.:206.375 mm; Bearing limiting speed:7000 r/min; Stabilizing ring:SR-13-0; |
| 74062A Franke Slewing Ring Bearings | Initial grease fill:110.56 g; A1:88.9 mm; h:34.925 mm; S:4.763 mm; N1:19.05 mm; End plug (suffix Y):EPR 9; Cap bolt recommended tightening torque:298.3 N·m; R1:53.975 mm; J max.:279.4 mm; Appropriate attachment bolt size G:0.625 in; Mass pillow block:22.7 kg; da:85 mm; Ca:45.796 mm; P120°:31.6 kN; Cap bolt, SAE grade:8; H2:38.1 mm; H1:95.25 mm; P60°:83.2 kN; R2:22.225 mm; J1:53.975 mm; |
| 73105L Franke Slewing Ring Bearings | Weight:129.000 kg; Static Load Rating:4,750,000 N; da (min):322 mm; Axial Load Factor Y2:3.06; Radial Clearance:0.330 to 0.430 mm; D:500 mm; Da (max):478 mm; Center Guidance:Fixed Inner Ring Rib; Configuration:Double Row; Groove Width A:26 mm; Roller Profile:Symmetric; Limiting Speed - Oil:1,000 rpm; B:160 mm; Axial Load Factor Y1:2.06; d:300 mm; Limiting Speed - Grease:790 rpm; Constant e:0.33; Axial Load Factor Y0:2.01; |
| 68575A Franke Slewing Ring Bearings | Ring Size:Standard; Grease Type:Unirex N2; Ship Weight:4.69 LB; Ball Grade:Class 10; Ball Bearing Housing Series:206 Series; Housing Type:2 Bolt Pillow Block; Bearing Insert Material:Steel; Flinger Material:Steel; Seal Type:Single Lip; Retainer Type:Std Retainer; Shaft Attachment (2):D-Lock; Bearing Inner Ring Material:Steel; Retainer Material:Nylon; Bearing Locking Device:Concentric Clamp Col; Flinger Type:Rubberized; |
| 73057L Franke Slewing Ring Bearings | Split Housing:SPLIT; Seal Type:Triple Lip; Bearing Locking Device:Setscrew; Expansion Type:Non-Expansion; d:1.6875 in; Housing Series:111 SERIES (108 - 11; Shaft Attachment Type:SETSCREW; Bearing Series:111 Series; Housing Product Type:K / DI; Bearing Bore Shape:Tapered; Housing Type:2 Bolt Pillow Block; Bearing Insert Material:Steel; Grease Type:Mobilgrease XHP222; Ship Weight:16.71 LB; Base to Center Hight Numeric:2.6300 in; |
| 68489A Franke Slewing Ring Bearings | Basic static load rating C0:1.25 kN; D2 ≈:19.4 mm; Calculation factor f0:14; C:1.5 mm; Calculation factor kr:0.025; Fatigue load limit Pu:0.054 kN; ra max.:0.3 mm; r1,2 min.:0.3 mm; D:22 mm; Basic dynamic load rating C:2.34 kN; Reference speed:70000 r/min; da max.:13 mm; d:10 mm; Mass bearing:0.011 kg; da min.:12 mm; D3:25 mm; d2 ≈:13.2 mm; Limiting speed:36000 r/min; B:6 mm; |
| 73089L Franke Slewing Ring Bearings | Permissible sliding velocity v max.:5 m/s; Coefficient of friction µ min.:0.05; B:6 mm; Specific static load factor K0:20 N/mm²; D:10 mm; D1:12 mm; Specific dynamic load factor K:10 N/mm²; B1:2 mm; Tolerance shaft:h8; Tolerance housing:H7; Permissible sliding velocity v min.:0.25 m/s; d:5 mm; Coefficient of friction µ max.:0.1; Mass bushing:0.003 kg; |
| 68609A Franke Slewing Ring Bearings | Limiting Speed - Grease:30,000 rpm; Factor fo:14.5; da (min):14 mm; Dynamic Load Rating:2,700 N; Enclosure:Open; Limiting Speed - Oil:36,000 rpm; Da (max):22 mm; ra (max):0.3 mm; B:6 mm; Configuration:Single Row; Bore Type:Cylindrical Bore; Fillet Radius/Chamfer:0.3 mm; Radial Clearance:0.011 to 0.025 mm; d:12 mm; Weight:0.011 kg; D:24 mm; Static Load Rating:1,320 N; |
| 66390L Franke Slewing Ring Bearings | Constant e:0.34; B:88 mm; Axial Load Factor Y0:1.95; Groove Width A:15 mm; d:140 mm; da (min):154 mm; Hole Diameter (do):8 mm; Retainer Material:Pressed Steel; Limiting Speed - Grease:2,100 rpm; Static Load Rating:1,290,000 N; Limiting Speed - Oil:2,600 rpm; Fillet Radius/Chamfer:3 mm; Axial Load Factor Y2:2.96; Axial Load Factor Y1:1.99; ra (max):2.5 mm; Center Guidance:Floating Steel Ring; Configuration:Double Row; |
| 68318A Franke Slewing Ring Bearings | d:90 mm; d1:80.963 mm; Sleeve:S 118x3.3/16; B:17.729 mm; B1:89.992 mm; Hydraulic nut:HMVC 18E; G:89.586 mm; Threads per inch:12; d3 max.:118.389 mm; B4:19.863 mm; Mass adapter sleeve assembly:1.8 kg; |
| 77266B Franke Slewing Ring Bearings | Seal Type:Triple Lip; Bearing Insert Material:Steel; UPC:782476479312; Manufacturing Plant Location:Rogersville, TN; d:1.6875 in; Ball Bearing Housing Series:210 Series; Bearing Series:210 Series; Self Aligning:Self Centering; Ring Size:Standard; Max Bearing Speed:3600 rpm; Bearing Locking Device:Setscrew; Ball Material:Steel; Shaft Attachment (2):Set Screw; Bearing Family:Setscrew Ball Bearin; Bearing Outer Ring Material:Steel; |
| 73021L Franke Slewing Ring Bearings | D2:67.12 mm; Static axial stiffness, preload class C:78 N/µm; Preload class B GB:100 N; ra max.:0.6 mm; Static axial stiffness, preload class A:43 N/µm; Attainable speed for grease lubrication:17000 r/min; Calculation factor f2C:1.09; Db max.:70.6 mm; B:12 mm; rb max.:0.3 mm; Calculation factor f1:1; Preload class D GD:400 N; Preload class A GA:50 N; Calculation factor fHC:1; db min.:53.2 mm; |
| 66166L Franke Slewing Ring Bearings | ra1 (max):2 mm; Da (max):150 mm; Dynamic Load Rating:207,000 N; Fillet Radius/Chamfer:2 mm; dc (min):109 mm; B:40 mm; db (max):105 mm; Limiting Speed - Grease:3,600 rpm; Limiting Speed - Oil:4,300 rpm; Weight:3.100 kg; r1:2 mm; db (min):100 mm; Configuration:Single Row; d:90 mm; dd (min):116 mm; Enclosure:Open; ra (max):2 mm; D:160 mm; Radial Clearance:0.075 to 0.110 mm; Bore Type:Cylindrical Bore; |
| 75060A Franke Slewing Ring Bearings | Limiting Speed - Grease:9,000 rpm; Static Load Rating:7,900 N; Configuration:Single Row; Radial Clearance:0.013 to 0.028 mm; Factor fo:13.9; B:15 mm; Enclosure:Double Seal; ra (max):1 mm; da (min):31 mm; Bore Type:Cylindrical Bore; Fillet Radius/Chamfer:1 mm; Weight:0.128 kg; Dynamic Load Rating:14,000 N; d:25 mm; Da (max):46 mm; D:52 mm; |
| 77250B Franke Slewing Ring Bearings | Mass pillow block:12.7 kg; J min.:219.075 mm; H2:28.575 mm; da:60.325 mm; Cap bolt, SAE grade:5; End plug (suffix Y):EPR 7; PG:1/8 NPT; P180°:30.2 kN; P150°:25.4 kN; H1:82.55 mm; Labyrinth ring:2 x LOR 36; ba:32.544 mm; N1:19.05 mm; H:157.559 mm; Appropriate attachment bolt size G:0.625 in; R2:21.431 mm; Da:130 mm; A1:79.375 mm; P60°:75.6 kN; Housing:SAF 515; |
| 73063L Franke Slewing Ring Bearings | Attachment bolt diameter G:15.875 mm; H1:63.5 mm; B:79.375 mm; Basic dynamic load rating C:99.6 kN; J min.:163.512 mm; J max.:187.325 mm; da:55.563 mm; Limiting speed:4500 r/min; A1:81.756 mm; L:225.425 mm; H:129.778 mm; A:60.325 mm; s:28.575 mm; H2:41.275 mm; Mass bearing unit:5.44 kg; S:0.794 mm; d2:82.55 mm; |
68546A Franke Slewing Ring Bearings Video
68546A - Slewing Ring Bearings Manufacturers Suppliers Exporters
68546A · Related Products · 75072A · 75071A · 75013A · 75036A · Reviews · Be the first to review “68546A” Cancel reply · Headquarters.
62-'67 Nova FLOOR PAN BRACES and REINFORCEMENTS
Part Number: 685-46A. Description: Brace Front Floor Brace (Made In USA) 1962-1967 Nova Front Floor Brace More Info. Discontinued. Discontinued.
#68546a hex color - Vintner - Violet - Warm
Hex #68546a Color Code is also known as Vintner color. Hex #68546a Color code in RGB color code model is created after adding 40.78% red color, 32.94% green ...
Sherman 685-46A 62-67 Chevy II Steel Front Floor Panel Brace
Sherman 685-46A 62-67 Chevy II Steel Front Floor Panel Brace made by Sherman, for as low as $97.99.
Faux-Granite gray (#68546a) hex color information - 2020 Colors
The hexidecimal color, #68546a, looks similar to "Granite gray" because they look the same at a quick glance. This color is described as "dark gray".
Sherman Parts 685-46A - Summit Racing
Free Shipping - Sherman Parts 685-46A with qualifying orders of $99. Shop Floor Panel Braces at Summit Racing.
68546A Hex Color (Eggplant) - Hex Dictionary
Color #68546a is Eggplant. In RGB: 40.78, 32.94, 41.57. In CMYK: 1.89, 20.75, 0, 58.43. Combinations. mono.
#68546a Color Hex
#68546a color RGB value is (104,84,106). #68546a hex color red value is 104, green value is 84 and the blue value of its RGB is 106.
68546 A, Cathedral City, CA 92234 | MLS# 301827232 | Redfin
0 beds vacant land located at 68546 A, Cathedral City, CA 92234 sold for $30000 on Oct 11, 2017. MLS# 301827232. Vacant lot!Upper Cathedral City small lot ...
Behr Vintner M100-6／#68546a十六进制颜色代码表，图表，调色板 ...
十六进制色码#68546a的色码表，绘图，调色板，混合，渐变及色彩空间转换。