| No. | Brand | J | l | F | b | T | H | S | E |
| 68755A | Franke | - | - | - | - | - | - | - | - |
| 66403L | Franke | - | - | - | - | - | - | - | - |
| 75016A | Franke | - | - | - | - | - | - | - | - |
| 77214A | Franke | - | - | - | - | - | - | - | - |
| 68577A | Franke | - | - | - | - | - | - | - | - |
| 66150L | Franke | - | - | - | - | - | - | - | - |
| 75071A | Franke | - | - | - | - | - | - | 4.763 mm | - |
| 67503A | Franke | - | - | - | - | - | - | - | - |
| 74104A | Franke | - | - | - | - | - | - | - | - |
| 77238A | Franke | - | - | - | - | - | - | - | - |
| 77218A | Franke | - | - | - | - | - | - | - | - |
| 68801A | Franke | 105 mm | - | - | - | - | 70.5 mm | - | - |
| 66168L | Franke | - | - | 30 mm | - | - | - | - | - |
| 68493A | Franke | - | - | - | - | - | - | - | - |
| 73119L | Franke | - | - | - | - | - | - | - | - |
| 74102A | Franke | - | - | - | - | - | 190.5 mm | 0.794 mm | - |
| 77222B | Franke | 50.8 mm | - | - | - | - | 157 mm | - | - |
| 73095L | Franke | - | - | - | - | - | - | - | - |
| 74136A | Franke | 70 mm | - | - | - | 38.8 mm | - | - | - |
| 68735A | Franke | 320 mm | - | - | - | - | 216 mm | - | - |
| 68570A | Franke | - | - | - | - | - | - | - | - |
| 75056A | Franke | - | - | - | 70 mm | - | - | - | - |
| 77310A | Franke | - | - | - | - | - | - | - | - |
| 69709L | Franke | - | - | - | 6 mm | 194 mm | - | - | - |
| 68741A | Franke | - | - | - | - | - | - | - | - |
| 73046L | Franke | - | - | - | - | - | - | - | - |
| 74062A Franke Slewing Ring Bearings | Initial grease fill:110.56 g; A1:88.9 mm; h:34.925 mm; S:4.763 mm; N1:19.05 mm; End plug (suffix Y):EPR 9; Cap bolt recommended tightening torque:298.3 N·m; R1:53.975 mm; J max.:279.4 mm; Appropriate attachment bolt size G:0.625 in; Mass pillow block:22.7 kg; da:85 mm; Ca:45.796 mm; P120°:31.6 kN; Cap bolt, SAE grade:8; H2:38.1 mm; H1:95.25 mm; P60°:83.2 kN; R2:22.225 mm; J1:53.975 mm; |
| 74102A Franke Slewing Ring Bearings | A1:123.825 mm; J max.:298.45 mm; d2:130.175 mm; S:0.794 mm; L:355.6 mm; H:190.5 mm; Attachment bolt diameter G:19.05 mm; Mass bearing unit:16.6 kg; s:36.513 mm; B:102.394 mm; J1:60.325 mm; da:87.313 mm; H2:57.15 mm; Basic dynamic load rating C:253 kN; A:114.3 mm; J min.:266.7 mm; Limiting speed:2300 r/min; H1:95.25 mm; |
| 75060A Franke Slewing Ring Bearings | Limiting Speed - Grease:9,000 rpm; Static Load Rating:7,900 N; Configuration:Single Row; Radial Clearance:0.013 to 0.028 mm; Factor fo:13.9; B:15 mm; Enclosure:Double Seal; ra (max):1 mm; da (min):31 mm; Bore Type:Cylindrical Bore; Fillet Radius/Chamfer:1 mm; Weight:0.128 kg; Dynamic Load Rating:14,000 N; d:25 mm; Da (max):46 mm; D:52 mm; |
| 74144A Franke Slewing Ring Bearings | d:17 mm; D:47 mm; Configuration:Double Row; B:22.2 mm; Limiting Speed - Grease:10,000 rpm; Dynamic Load Rating:23,100 N; Fillet Radius/Chamfer:1 mm; Bore Type:Cylindrical Bore; da:23 mm; a (max):2.5 mm; Da:41 mm; Limiting Speed - Oil:14,000 rpm; Static Load Rating:12,700 N; Weight:0.140 kg; Dx:53.5 mm; Snap Ring Outside Diameter:52.7 mm; Radial Clearance:0.011 to 0.025 mm; Cy:3.3 mm; Snap Ring Width:1.1 mm; |
| 75082A Franke Slewing Ring Bearings | d:22 mm; B:20 mm; Mass inner ring:0.035 kg; r, r1,2 min.:0.3 mm; F:28 mm; |
| 75059A Franke Slewing Ring Bearings | Ball Material:Steel; End Cap Groove:No; Shaft Attachment (2):Set Screw; Flinger Type:None; d:1.0000 in; Bearing Family:Setscrew Ball Bearin; Ring Size:Standard; Grease Type:Unirex N2; Housing Coating:Powder Coat; Bearing Insert Material:Steel; Bearing Outer Ring Material:Steel; Base to Center Height:Not Applicable; UPC:782475511969; Retainer Material:Nylon; Manufacturing Plant Location:Rogersville, TN; |
| 66145L Franke Slewing Ring Bearings | Bore Type:Cylindrical Bore; D:72 mm; Enclosure:Open; Db (min):67 mm; Db (max):64 mm; Dynamic Load Rating:33,500 N; d:35 mm; B:17 mm; r1:0.6 mm; Static Load Rating:31,500 N; da (min):42 mm; Da (max):65 mm; Limiting Speed - Grease:9,500 rpm; ra1 (max):0.6 mm; db (max):43 mm; Fillet Radius/Chamfer:1.1 mm; Configuration:Single Row; db (min):40 mm; Radial Clearance:0.025 to 0.050 mm; dd (min):50 mm; |
| 73009L Franke Slewing Ring Bearings | D1 ≈:475 mm; Operating clearance factor k2:0.099; Fatigue load limit Pu:375 kN; B:133 mm; ra max.:4 mm; Limiting speed:1300 r/min; s1 max.:25 mm; d:340 mm; Da max.:502 mm; Basic static load rating C0:5000 kN; Misalignment factor k1:0.12; r1,2 min.:5 mm; D:520 mm; Da min.:454 mm; d2 ≈:394 mm; Basic dynamic load rating C:2900 kN; Mass bearing:98.2 kg; Reference speed:950 r/min; Ca min.:2.1 mm; |
| 68781A Franke Slewing Ring Bearings | Self Aligning:Self Centering; Bearing Duty:Normal Duty; Max Bearing Speed:4000 rpm; Retainer Type:Max Life Cage; End Cap Groove:Yes; Bearing Outer Ring Material:Steel; Ring Size:Standard; d:1.7500 in; Retainer Material:Polymer; Manufacturing Plant Location:Rogersville, TN; Bearing Insert Material:Nickel-Coated Steel; Bearing Family:Setscrew Ball Bearin; Ball Grade:Class 24; Ball Material:440 STAINLESS STEEL; |
| 75075A Franke Slewing Ring Bearings | Dynamic Load Rating:201,000 N; Radial Clearance:0.060 to 0.090 mm; Da (max):110 mm; Enclosure:Open; Limiting Speed - Grease:4,800 rpm; Static Load Rating:233,000 N; B:43 mm; d:55 mm; Fillet Radius/Chamfer:2 mm; D:120 mm; ra1 (max):2 mm; ra (max):2 mm; Bore Type:Cylindrical Bore; dd (min):80 mm; Configuration:Single Row; r1:2 mm; db (max):69 mm; dc (min):72 mm; db (min):65 mm; Limiting Speed - Oil:5,600 rpm; |
| 68562A Franke Slewing Ring Bearings | T:40 mm; Hexagonal key size for grub screw N:2.5 mm; s1:21 mm; Housing material:Composite; A1:15 mm; Basic static load rating C0:7.8 kN; Fatigue load limit Pu:0.335 kN; d2:41.7 mm; A3:3.2 mm; Recommended diameter for attachment bolts, mm G:10 mm; Mass bearing unit:0.29 kg; Db:65 mm; Recommended diameter for attachment bolts, inch G:0.375 in; N:12.3 mm; Da:63.5 mm; J:99 mm; A5:18 mm; Thread grub screw G2:M5; |
| 68761A Franke Slewing Ring Bearings | Flinger Material:Steel; Self Aligning:Self Centering; d:1.1250 in; End Cap Groove:No; Grease Type:Unirex N2; UPC:782475117505; Housing Type:Wide Slot Take-Up; Retainer Type:Std Retainer; Ring Size:Standard; Bearing Series:206 Series; Flinger Type:Rubberized; Base to Center Height:Standard; Housing Coating:Powder Coat; Bearing Duty:Normal Duty; Anti-Rotation Pin:Yes; Manufacturing Plant Location:Rogersville, TN; |
| 68757A Franke Slewing Ring Bearings | Fillet Radius/Chamfer:1 mm; Enclosure:Double Shield; B:14 mm; d:17 mm; Weight:0.115 kg; Dynamic Load Rating:13,600 N; ra (max):1 mm; Static Load Rating:6,550 N; Radial Clearance:0.011 to 0.025 mm; Configuration:Single Row; Factor fo:12.3; da (min):23 mm; Limiting Speed - Grease:16,000 rpm; Da (max):41 mm; Bore Type:Cylindrical Bore; D:47 mm; |
| 68464A Franke Slewing Ring Bearings | D:160 mm; Oil Holes:2.5 mm; Radius:1 mm; B:20 mm; da:126 mm; Dynamic Load Rating:42.7 kN; Static Load Rating:70.2 kN; Da:143 mm; d:110 mm; |
| 77232A Franke Slewing Ring Bearings | Basic dynamic load rating C:44 kN; h:78 mm; α:9 °; d:20 mm; C1 max.:13.5 mm; B:16 mm; l2 max.:107 mm; d2 max.:54 mm; r1 min.:0.3 mm; Material constant KM:330; G:M 20x1.5; Specific dynamic load factor K:150 N/mm²; l1 min.:43 mm; Mass rod end:0.32 kg; dk:29 mm; l7 min.:24 mm; Basic static load rating C0:42.5 kN; |
| 66147L Franke Slewing Ring Bearings | Shaft Attachment Type:SPECIAL DUTY; Grease Type:Mobilgrease XHP222; Seal Type:Piston Ring; Split Housing:SPLIT; Housing Product Type:SPECIAL DUTY; d:1.4375 in; Expansion Type:Expansion; Housing Type:2 Bolt Pillow Block; Bearing Bore Shape:Tapered; UPC:782475036004; Housing Series:107 SERIES (106 - 10; Bearing Insert Material:Steel; Bearing Series:107 Series; Ship Weight:19 LB; |
66163L Franke Slewing Ring Bearings Video
Style 66163: A-Line Gown with Plunging Illusion Sabrina ...
Soft, romantic lace details this tulle A-line wedding gown. Featuring an illusion Sabrina neckline with a plunge, side cutouts, and sexy scoop back.
3M Hookit 371L Aluminum Oxide Hook & Loop Film Disc - RS ...
076308-66163 ... 3M Hookit 371L hook & loop film disc uses aluminum oxide as the abrasive material and has a diameter of 5 in. 3M incorporates this aluminum oxide ...
66163 Desco | Mouser
66163 Desco Anti-Static Control Products ROLL, STATFREE B2 VINYL, DARK BLUE, 0.060''x48''x50' datasheet, inventory, & pricing.
IL-29 antibody (66163-1-Ig) | Proteintech
GST tagged recombinant IL29 protein were subjected to SDS PAGE followed by western blot with 66163-1-Ig (IL-29 antibody at dilution of 1:20000 incubated at ...
Chlorobenzene and Acetic Acid solution | 66163 - Honeywell ...
Chlorobenzene and Acetic Acid solution Chlorobenzene / Acetic Acid (2:1, v/v), CAS Number: 108-90-7, 64-19-7,(66163 Burdick & Jackson).Shop now or request a ...Incompatible Materials: Formation of explosive ...Form: LiquidColor: Colorless
66163 - Slim-Line Under Light Male To Slim-Line Under Light
Grote Industries - Part: #66163 - Slim-Line Under Light Male To Slim-Line Under Light Double Female, 12' 8" Long. Multiple ID lamp jumper.Connection Type: Slim-Line.180" Male Bullet, ...Wire Length: 151"Pack Quantity: Individual (12 per carton)Connector Quantity: 2
66163 - Gene ResultMrpl4 mitochondrial ribosomal protein L4 ...
Mrpl4 mitochondrial ribosomal protein L4 [ (house mouse)]. Gene ID: 66163, updated on 23-Jun-2021. Summary. Other designations. 39S ribosomal protein L4, ...
Edelbrock 66163 - Summit Racing
Edelbrock 66163 - Edelbrock Headers. Headers, Shorty, Stainless Steel, Ti-Tech Ceramic Coated, Chevy, GMC, Blazer, Pickup, Tahoe, Yukon, 5.0, 5.7LPart Type: HeadersHeader Style: ShortyHeader Color: Titanium ceramic coatedFlange Thickness (in.): 0.375 in
66163 Desco | Static Control, ESD, Clean Room Products
66163 – Conductive, Dissipative Table, Workbench Runner Grounding Mat Vinyl Blue, Dark 50' (15.24m) X 4' (1.22m) from Desco. Pricing and Availability on ...
66163L LILY Interchangeable From Franke Slewing Ring Bearings ...
66163L Slewing Ring Bearings ; Outside Diameter Of Outer Ring, 20 mm ; Weight, 25.9 Kg ; Basic Dynamic Load Rating Axial (Ca), 94000 N ; Basic Static Load Rating ...