| No. | Brand | d | a | N | F | A | w | L | D |
| NSK 240TFD3201 | - | - | 119.752 mm | - | - | - | - | - | 250 mm |
| SKF 351121C | - | - | - | - | - | - | - | 244.475 mm | - |
| 547720Y | - | - | - | - | - | - | - | - | - |
| 545936 | - | 55 mm | - | - | - | - | - | - | 120 mm |
| NSK 350TFD5401 | - | 150 mm | - | - | - | - | - | - | - |
| FAG 545991 | - | - | - | - | - | - | - | 869.95 mm | - |
| 2THR94722 | - | 130 mm | - | - | - | - | - | - | 280 mm |
| 829976 | - | - | - | - | - | - | - | - | 42 mm |
| NTN CRTD5317 | - | 80 mm | - | - | - | - | - | - | 140 mm |
| FAG 545678 | - | 22 mm | - | - | - | - | - | - | 32 mm |
| 829234 | - | - | - | - | - | - | - | 558.8 mm | - |
| 509391 | - | 130 mm | - | - | - | - | - | - | 230 mm |
| 829744 | - | - | - | - | - | - | - | - | 250 mm |
| 513401 | - | 140 mm | - | - | - | - | - | - | 300 mm |
| SKF 353002 | - | 12 mm | - | - | 16 mm | - | - | - | - |
| 540295 | - | - | - | - | - | - | - | - | - |
| 560910Y | - | 38.1 mm | - | 14.3 mm | - | 38.9 mm | - | 130.2 mm | - |
| 524194 | - | - | - | - | - | - | - | 349.25 mm | - |
| SKF 350901C | - | 75 mm | - | - | - | - | - | - | 115 mm |
| NSK 350TFD4901 | - | 50 mm | - | - | - | - | - | - | 110 mm |
| SKF 351182C | - | 5 mm | - | - | - | - | 9 mm | - | - |
| NSK 170TFD2401 | - | 35 mm | - | - | - | - | - | - | 80 mm |
| 545645Y | - | 800 mm | - | - | - | 10 mm | - | - | - |
| FAG 540295 | - | 17 mm | - | - | - | - | - | - | 35 mm |
| 526360Y | - | - | - | - | - | - | - | 330.2 mm | - |
| 528562 | - | 70 mm | - | - | - | - | - | - | 125 mm |
| FAG 52201 | - | 90 mm | - | - | - | - | - | - | 210 mm |
| SKF 350982C | - | - | - | - | - | - | - | - | 100 mm |
| SKF 353006 | - | - | - | - | - | - | - | 387.35 mm | - |
| 513828 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Mass plain bearing:425 kg; Sealing solution:-; α:2 °; Da min.:580 mm; rb max.:5 mm; b:27 mm; Specific static load factor K0:120 N/mm²; D:680 mm; Design (sliding contact surface combination):Steel/PTFE FRP; Basic static load rating C0:21200 kN; b1:27 mm; d:480 mm; Lubricant:Maintenance free &nd; dk:623 mm; da min.:503 mm; ra max.:2 mm; r2 min.:5 mm; Specific dynamic load factor K:80 N/mm²; |
| SKF 353162 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | d:35 mm; Bore Type:Cylindrical Bore; ra (max):1 mm; Radial Clearance:0.015 to 0.033 mm; Dynamic Load Rating:25,700 N; Factor fo:13.8; Fillet Radius/Chamfer:1.1 mm; Static Load Rating:15,300 N; da (min):42 mm; Limiting Speed - Grease:9,800 rpm; Weight:0.288 kg; Da (max):65 mm; Enclosure:Double Shield; Configuration:Single Row; B:17 mm; D:72 mm; |
| 829788 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | da (min):140 mm; B:69 mm; Center Guidance:Floating Steel Ring; Limiting Speed - Oil:3,300 rpm; Da (max):190 mm; Weight:7.930 kg; Limiting Speed - Grease:2,600 rpm; ra (max):2 mm; Nr. of Holes:6; Configuration:Double Row; Radial Clearance:0.145 to 0.190 mm; d:130 mm; Axial Load Factor Y1:2.14; Hole Diameter (do):6 mm; Dynamic Load Rating:710,000 N; Roller Profile:Symmetric; Retainer Material:Pressed Steel; |
| 2THR846217 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | D:11 mm; Coefficient of friction µ min.:0.05; d:8 mm; Tolerance housing:H7; Coefficient of friction µ max.:0.1; Specific static load factor K0:20 N/mm²; B:6 mm; Mass bushing:0.002 kg; Specific dynamic load factor K:10 N/mm²; Tolerance shaft:h8; Permissible sliding velocity v max.:5 m/s; Permissible sliding velocity v min.:0.25 m/s; |
| FAG 52201 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Oil Holes:3 mm; Mounting Hole Countersink Depth:8.6 mm; Chamfer:1.5 mm; Thread Size:M3; Number of Mounting Holes:12; Dynamic Load Rating:46 kN; da:139 mm; Static Load Rating:80.2 kN; Da:157 mm; Inner rings PCD:112 mm; B:25 mm; Mounting Hole Size:9 mm; d:90 mm; Mounting Hole Countersink Diameter:14 mm; Outer rings PCD:187 mm; D:210 mm; |
| FAG 528974 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Coefficient of friction µ max.:0.15; Tolerance housing:H7 m/s; Permissible sliding velocity v max.:1 m/s; B1:2.5 mm; d:45 mm; Specific dynamic load factor K:40 N/mm²; Mass bushing:0.1 kg; Coefficient of friction µ min.:0.08; B:30 mm; D:50 mm; r max.:2.5 mm; Permissible sliding velocity v min.:0 m/s; Tolerance shaft:f7 m/s; D1:60 mm; Specific static load factor K0:120 N/mm²; |
| FAG 522008 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Center Guidance:Floating Steel Ring; Static Load Rating:510,000 N; Limiting Speed - Oil:3,800 rpm; Limiting Speed - Grease:3,100 rpm; da (min):107 mm; D:170 mm; Bore Type:Cylindrical Bore; Axial Load Factor Y1:2.24; Axial Load Factor Y0:2.19; Hole Diameter (do):5 mm; Configuration:Double Row; Roller Profile:Symmetric; Radial Clearance:0.060 to 0.100 mm; Fillet Radius/Chamfer:2.1 mm; B:55.6 mm; ra (max):2 mm; |
| NTN CRTD3618 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Center Guidance:Fixed Inner Ring Rib; ra (max):6 mm; D:830 mm; Axial Load Factor Y0:1.66; Bore Type:Tapered Bore; da (min):536 mm; Configuration:Double Row; Dynamic Load Rating:11,000,000 N; d:500 mm; Groove Width A:50 mm; Constant e:0.40; Axial Load Factor Y2:2.53; Hole Diameter (do):25 mm; Axial Load Factor Y1:1.70; Limiting Speed - Oil:540 rpm; Retainer Material:Machined Brass; Fillet Radius/Chamfer:7.5 mm; |
| NSK 190TFD3301 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | d:500 mm; Mass withdrawal sleeve:89.5 kg; Hydraulic nut:HMV 106 E; A:9 mm; B2:405 mm; B1:393 mm; G:Tr 530x6; d1:480 mm; G1:54 mm; G2:G 1/4; |
| NTN CRTD11002 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | P150°:120 kN; H:422.275 mm; A1:203.2 mm; Appropriate attachment bolt size G:1.25 in; L:749.3 mm; R1:122.237 mm; J min.:571.5 mm; dc:193.675 mm; PG:1/4 NPT; Stabilizing ring:SR-40-34; Pa:93.9 kN; Taconite seal (db shaft position):TER 175; Cap bolt, SAE grade:5; J max.:635 mm; Taconite seal (dc shaft position):TER 164; End plug (suffix Y):EPR 22; Da:359.999 mm; A2:374.65 mm; H1:209.55 mm; Cap bolt:4 x 7/8-9 UNC; |
| 544025 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Radial Clearance:0.023 to 0.043 mm; b (min):1.3 mm; Snap Ring Outside Diameter:82.7 mm; Static Load Rating:10,600 N; Dynamic Load Rating:11,500 N; Factor fo:16.3; Limiting Speed - Grease:8,000 rpm; B:10 mm; da (min):62 mm; ra (max):0.3 mm; Da (max):76 mm; Enclosure:Single Shield with S; Fillet Radius/Chamfer:0.3 mm; D:78 mm; Configuration:Single Row; Snap Ring Width:1.1 mm; a (max):1.7 mm; Cy (max):2.5 mm; |
| 2THR765613 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | P90°:136 kN; A1:158.75 mm; H1:169.875 mm; PG:1/4 NPT; Pa:40 kN; Cap bolt:4 x 3/4-10 UNC; P120°:85.9 kN; J max.:488.95 mm; Eye bolt:2 x 3/8-16 UNC; Max. speed for Taconite seal:460 r/min; J1:95.25 mm; A2:279.4 mm; da:161.925 mm; R2:33.337 mm; Initial grease fill:793.8 g; Appropriate attachment bolt size G:1 in; Cap bolt recommended tightening torque:203.4 N·m; R1:104.775 mm; H2:66.675 mm; |
| NSK 670TFD9001 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | B:13.741 mm; B1:67.285 mm; d:60 mm; G:59.944 mm; Sleeve:S 112x2.1/16; B4:15.088 mm; Threads per inch:18; d3 max.:80.289 mm; Hydraulic nut:HMVC 12E; d1:52.388 mm; Mass adapter sleeve assembly:0.73 kg; |
| FAG 5634 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | da:82.55 mm; R1:73.025 mm; Mass pillow block:44 kg; H:230.981 mm; N1:22.225 mm; Pa:17.3 kN; h:47.625 mm; H2:50.8 mm; PG:1/8 NPT; ba:52.388 mm; End plug (suffix Y):EPR 11; J max.:342.9 mm; P90°:77 kN; Appropriate attachment bolt size G:0.75 in; RG:3/8 NPT; L:393.7 mm; Housing:SAF 618; J min.:304.8 mm; P150°:44.5 kN; J1:57.15 mm; |
| 2THR94722 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | D:280 mm; da (min):148 mm; Limiting Speed - Grease:1,900 rpm; Weight:28.400 kg; Enclosure:Open; Hole Diameter (do):8 mm; Radial Clearance:0.120 to 0.160 mm; Groove Width A:16 mm; Configuration:Double Row; Constant e:0.33; Axial Load Factor Y2:3.02; Static Load Rating:1,340,000 N; Nr. of Holes:6; Center Guidance:Floating Steel Ring; Axial Load Factor Y0:1.98; Bore Type:Tapered Bore; Limiting Speed - Oil:2,600 rpm; |
| SKF 351761A DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Fillet Radius/Chamfer:1.5 mm; Radial Clearance:0.040 to 0.075 mm; db (max):87 mm; B:31 mm; dd (min):96 mm; Enclosure:Open; d:75 mm; dc (min):90 mm; ra1 (max):1.5 mm; Static Load Rating:207,000 N; Weight:1.800 kg; r1:1.5 mm; db (min):83.5 mm; Dynamic Load Rating:162,000 N; Limiting Speed - Grease:4,300 rpm; Da (max):121.5 mm; Limiting Speed - Oil:5,300 rpm; ra (max):1.5 mm; Configuration:Single Row; |
515196 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS Video
5R110W TorqShift Transmission Filter | Raybestos Powertrain
515196 replaces OE part 8C3Z-7A098-D and meets or exceeds OEM requirements and provides consistent, reliable protection as a Transmission Filter for every ...
SunCoast Diesel 515196 5R110 Transmission Filter For Ford ...
Buy SunCoast Diesel 515196 5R110 Transmission Filter For Ford 2008-UP 6.4L Power Stroke: Transmission Filters - Amazon.com ✓ FREE DELIVERY possible on ...Package Dimensions: 10 x 10 x 6 inchesItem Weight: 3 pounds
SunCoast 515196 Transmission Filter | 2008-2010 Ford 6.4L ...
SunCoast 515196 Transmission Filter | 08-10 Ford 6.4L Powerstroke. Thoroughbred Sku #: SUN515196 Manufacturer Sku #: 515196 ...
Sun Coast® 515196 - Automatic Transmission Filter - Semi ...
Sun Coast made a living on failure analysis of OEM parts. Sun Coast assessed and created parts to provide quality manufactured products designed with specific ...
#515196 hex color
#515196 Color Information ... In a RGB color space, hex #515196 is composed of 31.8% red, 31.8% green and 58.8% blue. Whereas in a CMYK color space, it is ...
Bunton, Bobcat, Ryan 515196 TINE CORING .5 - Jacks Small ...
Bunton, Bobcat, Ryan TINE CORING .5 515196. We have the Bunton, Bobcat, Ryan TINE CORING .5 you need with fast shipping and low prices.
Schiller Genuine Part 515196 TINE CORING .5 - SLE Equipment
Schiller Genuine Part 515196 TINE CORING .5 ; Details. 515196 - SLE Equipment is a full line Distributor and carries 99% of all lines in the outdoor power ...
#515196 Hex Color Code, RGB and Paints - Encycolorpedia
The hexadecimal color code #515196 is a shade of blue-magenta. In the RGB color model #515196 is comprised of 31.76% red, 31.76% green and 58.82% blue. In the ...
Bob-Cat Part Number 515196 TINE 1/2 CORING - Russo ...
Bob-Cat Part Number 515196 TINE 1/2 CORING ... WARNING: This product may contain chemicals known to the State of California to cause cancer, birth defects and ...
Steiner Turf: TINE 1/2 CORING, Part # 515196 - Messicks
Steiner Turf: TINE 1/2 CORING, Part # 515196 Buy Online & Save. TINE 1/2 CORING.