| No. | Brand | d | a | N | F | A | w | L | D |
| NSK 260TFD3602 | - | 560 mm | - | - | - | - | - | - | 750 mm |
| 5634 | - | 20 mm | - | - | - | - | 24 mm | - | - |
| 82978 | - | 45 mm | - | - | - | - | - | - | 85 mm |
| NTN CRTD3401 | - | 558.8 mm | - | - | - | - | - | - | 736.6 mm |
| FAG 530739 | - | - | - | - | - | - | - | - | - |
| NSK 450TFD6401 | - | - | - | 50 mm | - | 350 mm | - | 830 mm | - |
| SKF 350981C | - | - | - | - | - | - | - | - | - |
| 545991 | - | 45 mm | - | - | - | - | - | - | - |
| 511746 | - | 440 mm | - | - | - | - | - | - | 720 mm |
| 2THR765613 | - | - | - | - | - | - | - | - | - |
| 2THR52369 | - | - | - | - | - | - | - | - | - |
| 829954 | - | 80 mm | - | - | - | - | - | - | 110 mm |
| FAG 528876 | - | - | - | - | - | - | - | - | 16 mm |
| FAG 532584 | - | - | 88 mm | - | - | - | - | - | 170 mm |
| SKF 351175C | - | 30 mm | - | - | - | - | - | - | 47 mm |
| SKF 353152 | - | 12 mm | - | - | - | - | - | - | 32 mm |
| NTN CRTD8201 | - | 380 mm | - | - | - | 4 mm | - | - | - |
| 546680Y | - | 130 mm | - | - | - | - | - | - | 280 mm |
| 2THR94722 | - | 130 mm | - | - | - | - | - | - | 280 mm |
| NTN CRTD6001 | - | - | - | - | - | - | - | - | - |
| NTN CRTD6404 | - | - | - | - | - | - | - | - | 90 mm |
| FAG 52474 | - | 65 mm | - | - | - | - | - | - | - |
| NSK 230TFD4101 | - | 30 mm | - | - | - | - | - | - | 55 mm |
| NSK 440TFD6601 | - | 60 mm | - | - | - | - | - | - | 110 mm |
| FAG 529086 | - | 240 mm | - | - | - | - | - | - | 360 mm |
| 82997 | - | 45 mm | 16.1 mm | - | - | - | - | - | - |
| 2THR846217 | - | 8 mm | - | - | - | - | - | - | 11 mm |
| FAG 528562 | - | 300 mm | - | - | - | 9 mm | - | - | - |
| NSK 460TFD6801 | - | 40 mm | - | - | - | - | - | - | 90 mm |
| NTN CRTD5007 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | db (min):30 mm; Radial Clearance:0.035 to 0.060 mm; Limiting Speed - Grease:12,000 rpm; Dynamic Load Rating:24,300 N; db (max):31 mm; Da (max):46 mm; dd (min):37 mm; ra (max):1 mm; Inside Ring Outside Diameter:32 mm; B:18 mm; ra1 (max):0.6 mm; r1:0.6 mm; Limiting Speed - Oil:14,000 rpm; Configuration:Single Row; Enclosure:Open; Bore Type:Cylindrical Bore; dc (min):34 mm; D:52 mm; d:25 mm; Static Load Rating:23,500 N; |
| FAG 515196 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | B:33 mm; Shaft design:Without shaft; Purpose/ Application:Disc mowers; Mass:0.61 kg; d:35 mm; D:72.043 mm; Basic dynamic load rating C:46.2 kN; Flange design:Without flange; Basic static load rating C0:40 kN; |
| NTN CRTD5005 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | ra max.:1 mm; da max.:56 mm; Da max.:75.4 mm; Mass bearing:0.23 kg; Fatigue load limit Pu:6.7 kN; Basic static load rating C0:56 kN; r3,4 min.:0.6 mm; F:57.5 mm; r1,2 min.:1 mm; Calculation factor kr:0.1; rb max.:1 mm; D:80 mm; db min.:60 mm; s max.:1 mm; Limiting speed:12000 r/min; d:50 mm; Basic dynamic load rating C:46.8 kN; Reference speed:11000 r/min; da min.:53.2 mm; B:16 mm; |
| 516225Y DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Weight:7.450 kg; Da (max):291 mm; Radial Clearance:0.075 to 0.140 mm; Factor fo:16.4; d:220 mm; D:300 mm; Bore Type:Cylindrical Bore; Enclosure:Open; B:38 mm; Configuration:Single Row; Limiting Speed - Oil:2,300 rpm; ra (max):2 mm; Fillet Radius/Chamfer:2.1 mm; da (min):229 mm; Dynamic Load Rating:132,000 N; Static Load Rating:154,000 N; Limiting Speed - Grease:2,000 rpm; |
| SKF 351175C DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Calculation factor f2C:1.12; Fatigue load limit Pu:0.183 kN; Reference grease quantity Gref:0.63 cm³; D:47 mm; Attainable speed for grease lubrication:32000 r/min; Ball diameter Dw:4.762 mm; Basic dynamic load rating C:6.76 kN; Static axial stiffness, preload class C:121 N/µm; rb max.:0.2 mm; Calculation factor e:0.68; r3,4 min.:0.2 mm; Number of balls z:20; d:30 mm; Calculation factor f1:0.98; |
| NSK 240TFD3201 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | a:119.752 mm; l:13 mm; rc max.:0.6 mm; db min.:194 mm; Reference speed:1500 r/min; Calculation factor Y1:1.4; Mass bearing pair:14.3 kg; Basic dynamic load rating C:746 kN; T:103 mm; D:250 mm; r1,2 min.:2.5 mm; ra max.:2.5 mm; Basic static load rating C0:1460 kN; Calculation factor Y2:2.1; Db min.:241 mm; r5 min.:0.6 mm; b:7.5 mm; C:81 mm; Calculation factor e:0.48; Fatigue load limit Pu:137 kN; |
| 545645Y DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Hydraulic nut:HMV 160E; G:Tr 800x7; B5:112 mm; A:10 mm; d3:920 mm; B:90 mm; B1:303 mm; Mass adapter sleeve assembly:260 kg; d1:750 mm; G3:13 mm; d:800 mm; G2:G 1/8; |
| 545991 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | d2 max.:104 mm; C1 max.:28 mm; G:M 45x3; α:7 °; Basic dynamic load rating C:127 kN; r1 min.:0.6 mm; Basic static load rating C0:200 kN; l2 max.:219 mm; l7 min.:50 mm; h:165 mm; dk:60 mm; Material constant KM:330; Specific dynamic load factor K:100 N/mm²; d:45 mm; Mass rod end:2.55 kg; B:32 mm; l1 min.:95 mm; |
| 829244 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Mass pillow block:223 kg; Taconite seal:TER 155; R1:120.65 mm; Max. speed for Taconite seal:440 r/min; Cap bolt:1 1/8-7 UNC; L:711.2 mm; Da:339.999 mm; Housing:SSAFS 538; P90°:249 kN; Cap bolt, SAE grade:8; RG:1 NPT; P180°:160 kN; Ca:101.803 mm; A2:339.725 mm; R2:42.069 mm; h:61.913 mm; H1:200.025 mm; Pa:52.5 kN; A1:190.5 mm; P60°:416 kN; |
| 2THR644411 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Groove Width A:48 mm; Weight:1077.000 kg; Bore Type:Tapered Bore; Configuration:Double Row; B:250 mm; da (min):1096 mm; d:1060 mm; Axial Load Factor Y2:6.03; D:1400 mm; Constant e:0.17; Fillet Radius/Chamfer:7.5 mm; Limiting Speed - Oil:270 rpm; Retainer Material:Machined Brass; Da (max):1364 mm; Nr. of Holes:8; Dynamic Load Rating:13,200,000 N; ra (max):6 mm; Hole Diameter (do):25 mm; Roller Profile:Symmetric; |
| 5634 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Basic static load rating C0:57 kN; l5 ≈:16 mm; G:M 20x1.5; r1 min.:0.3 mm; dk:29 mm; d:20 mm; Material constant KM:330; Specific dynamic load factor K:100 N/mm²; B:16 mm; Basic dynamic load rating C:30 kN; Mass rod end:0.34 kg; C1 max.:13.5 mm; d2 max.:54 mm; w:24 mm; l3 min.:30 mm; h1:77 mm; l7 min.:24 mm; l4 max.:106 mm; d4 ≈:28 mm; α:9 °; |
| NTN CRTD8801 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Dx (min):195 mm; Snap Ring Outside Diameter:192.9 mm; r1:0.5 mm; Weight:3.140 kg; Dynamic Load Rating:122,000 N; Limiting Speed - Grease:3,600 rpm; B:34 mm; Radial Clearance:0.030 to 0.058 mm; Static Load Rating:93,000 N; Configuration:Single Row; Factor fo:14.4; ra (max):2 mm; D:180 mm; a (max):5.7 mm; d:100 mm; Bore Type:Cylindrical Bore; da (min):112 mm; Limiting Speed - Oil:4,300 rpm; D1 (max):173.7 mm; |
| NTN CRTD3401 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | T:322.262 mm; d1 ≈:595 mm; Basic static load rating C0:14300 kN; Calculation factor Y2:2.9; Calculation factor Y1:1.9; Comparative axial load rating CFa:259 kN; Design variant/feature:TQOS/GWISI; r3,4 min.:6.4 mm; Comparative radial load rating CF:1530 kN; Thrust factor K:1.7; Mass bearing:345 kg; D:736.6 mm; Calculation factor e:0.35; Basic dynamic load rating C:5830 kN; Calculation factor Y0:1.8; |
| FAG 515805 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Static Load Rating:2,230,000 N; Limiting Speed - Oil:1,200 rpm; Limiting Speed - Grease:1,000 rpm; Outside Ring Inside Diameter:464 mm; Bore Type:Cylindrical Bore; Enclosure:Open; Db (max):468 mm; Fillet Radius/Chamfer:6 mm; da (min):288 mm; Db (min):512 mm; db (min):288 mm; Dynamic Load Rating:1,620,000 N; D:540 mm; db (max):331 mm; r1:6 mm; ra (max):5 mm; B:102 mm; Weight:114.000 kg; Da (max):512 mm; |
| NSK 180TFD4001 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Basic static load rating C0:16300 kN; Fatigue load limit Pu:960 kN; Reference speed:360 r/min; Basic dynamic load rating C:7350 kN; Limiting speed:480 r/min; d2 ≈:940 mm; da min.:873 mm; ra max.:5 mm; Da min.:1025 mm; Misalignment factor k1:0.135; D1 ≈:1053 mm; r1,2 min.:6 mm; D:1120 mm; s1 max.:35.9 mm; Da max.:1097 mm; Ca min.:2.9 mm; da max.:963 mm; Mass bearing:540 kg; d:850 mm; B:200 mm; |
| 829788 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | da (min):140 mm; B:69 mm; Center Guidance:Floating Steel Ring; Limiting Speed - Oil:3,300 rpm; Da (max):190 mm; Weight:7.930 kg; Limiting Speed - Grease:2,600 rpm; ra (max):2 mm; Nr. of Holes:6; Configuration:Double Row; Radial Clearance:0.145 to 0.190 mm; d:130 mm; Axial Load Factor Y1:2.14; Hole Diameter (do):6 mm; Dynamic Load Rating:710,000 N; Roller Profile:Symmetric; Retainer Material:Pressed Steel; |
SKF 353162 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS Video
SKF 353162 bearing - Real Bearing Company a Manufacturer
Combined with the SKF 353162 bearing , SKF 353162 bearing has the most complete product outline in rolling bearing industry . SKF 353162 bearing provide
SKF 353162 180x280x90mm Bearing |
Jan 30, 2017 - Basic Parameters. Bearing Number, 353162. Type, Taper Roller Thrust Bearing. Boundary Dimensions (mm). d, 180. D, 280. B, 90
353162 SKF • ABF Store
353162 SKF available at ABF.store ✓ Same-day shipment ✓ 8.000.000 bearings and electric motors ✓ Worldwide delivery ✓ Customer Service in 8 languages
SKF - 353162 - Motion Industries
Buy SKF Tapered Roller Thrust Bearings 353162 direct from Motion Industries. Your proven service leader with reliable delivery since 1972
SKF 353162|353162 |353162 bearings Gibraltar
SKF 353162 bearing size parameters / SKF 353162 bearing edit. Model: 353162 bearing Brand: SKF Bearing Series: Thrust Roller Bearings, Thrust tapered
SKF 353162 Tapered Roller BRGS Factory New:
FACTORY NEW *** THIS LISTING IS FOR - ( 1 ) PIECE 353162 SKF, TAPERED ROLLER BRGS *** FACTORY STOCK ***
SKF | 353162 | Thrust Roller Bearing | Applied
Shop SKF 353162 at Applied.com, which includes; Thrust Roller Bearing, 180 mm ID, 280 mm OD, 90 mm Width, Tapered Bore
SKF 353162 180x280x90mm Bearing |
Jan 30, 2017 - 353162 Double Direction Tapered Roller Thrust Bearing d: 180mm D: 280mm B: 90mm Weight: 22kg Basic Load Ratings(KN): Dyn(C)720
SKF 353162 TAPERED ROLLER BRGS FACTORY ... - Walmart
Free Shipping. Buy SKF 353162 TAPERED ROLLER BRGS FACTORY NEW at Walmart.com
Looking for professional skf thrust bearings 353162 from ESG
Shop for high quality skf thrust bearings 353162 at ESG Bearing,we can be used to replace bearings from top brands and has received approval from domestic