No. | Brand | X | E | H | s | N | m | G | L |
MUCTPL207-20B | AMI | - | - | - | - | - | - | - | - |
USTU5000A-208-C | SEALMASTER | - | - | - | - | - | - | - | - |
USTU5000A-203 | SEALMASTER | - | - | - | - | - | - | - | - |
TU220W X 2-7/16 | HUB CITY | - | - | - | - | - | - | - | - |
MST-22 | SEALMASTER | - | - | - | - | - | - | - | - |
USTA5000A-207-C | SEALMASTER | - | - | - | - | - | - | 25 mm | 36 mm |
USTU5000-200-C | SEALMASTER | - | - | - | - | - | - | - | - |
TU220W X 1-7/16 | HUB CITY | - | - | - | - | - | - | - | - |
ST-27C RM | SEALMASTER | - | - | - | - | - | - | - | - |
CUCT209CE | AMI | - | - | - | - | - | - | - | - |
MUCTPL206B | AMI | - | - | - | - | - | - | - | - |
USTU5000-211 | SEALMASTER | - | - | - | - | - | - | - | - |
TU350 X 1-15/16 | HUB CITY | - | 471 mm | - | - | - | - | - | - |
CUCT215CE | AMI | - | - | 80 mm | - | - | - | - | - |
ST-27U RM | SEALMASTER | - | - | - | - | - | - | - | - |
USTA5000A-115-C | SEALMASTER | - | - | - | - | 12.7 mm | - | - | - |
ST-16 RM | SEALMASTER | - | - | - | - | - | - | - | - |
USTU5000-315 | SEALMASTER | - | - | - | - | - | - | - | - |
USTU5000-207 | SEALMASTER | - | - | - | - | - | - | - | - |
MUCTPL207-20RFB | AMI | - | - | - | - | - | - | - | - |
ST-39 RM | SEALMASTER | - | - | - | - | - | - | - | - |
USTA5000AE-215-C | SEALMASTER | - | - | - | - | - | - | - | - |
MUCWTPL205-16W | AMI | - | - | - | - | - | - | - | - |
ST-27 | SEALMASTER | - | - | - | - | - | - | - | - |
HUB CITY TU220W X 1-3/8 Take Up Unit Bearings | C:30 mm; Bearing number:NCF 2926 V; Outer Diameter (mm):180; Brand:SIGMA; Bore Diameter (mm):130; d:130 mm; Width (mm):30; D:180 mm; B:30 mm; Size (mm):130x180x30; |
SEALMASTER USTU5000-203-C Take Up Unit Bearings | Size (mm):95x160x67; d2:95 mm; B:15 mm; Outer Diameter (mm):160; R:125 mm; ra max.:1 mm; r min.:1.1 mm; rb max.:1 mm; A:62 mm; Width (mm):67; |
AMI MUCWTPL207-21W Take Up Unit Bearings | Shaft Size:280 mm; Series Type:Medium Series; Maximum Speed:670 rpm; Note:This product line wa; Bearing - Housing - Seal:MSM280BXH; Bolt Size:8 x M30; Dimension R:26.9 in; Bearing Number:MSM280BX; Seal Type:Felt Seal; Dimension V:0.2 in; |
SEALMASTER USTA5000-203 Take Up Unit Bearings | T:27,783 mm; B:28,575 mm; Bearing number:33895/33821; (Grease) Lubrication Speed:3900 r/min; Outer Diameter (mm):95,25; Weight:0,79 Kg; Basic dynamic load rating (C):120 kN; Brand:CX; Basic static load rating (C0):161 kN; Bore Diameter (mm):53,975; |
SEALMASTER ST-31T RM Take Up Unit Bearings | Bearing Outside Diameter, Nominal(Do):50.000; ID Chamfer Angle (B deg.):45; Average Clearance (Cd):0.1530; Shaft Dia., Nominal (d):45.0000; Bearing Type:metal with bronze; OD Chamfer Length (Co):1.800; Bearing Bore after Mounting (di):45 +0.225 / +0.080; Wall Thickness (S3):2.430; Brand:AST; Bore Diameter (mm):45; |
AMI CUCT215C Take Up Unit Bearings | Outer Diameter (mm):110; Brand:CRAFT; d:60 mm; B:28 mm; Size (mm):60x110x28; Bearing number:62212-2RS; Width (mm):28; C:28 mm; D:110 mm; Bore Diameter (mm):60; |
SEALMASTER USTA5000AE-215-C Take Up Unit Bearings | B:64 mm; r2 min.:3 mm; Calculation factor (Y0):0.95; Basic dynamic load rating (C):395000 kN; C:53 mm; d:90 mm; Size (mm):90x190x67.5; Bearing number:32318; Outer Diameter (mm):190; Basic static load rating (C0):500000 kN; |
SEALMASTER ST-27 Take Up Unit Bearings | Bore Diameter (mm):20,000; Brand:SNR; Width (mm):15,000; D:52,000 mm; Outer Diameter (mm):52,000; C:15,000 mm; B:15,000 mm; Size (mm):20x52x15; d:20,000 mm; Bearing number:6304HT200; |
SEALMASTER USTA5000A-207-C Take Up Unit Bearings | T:12 mm; Thread (G1):M5; Bearing number:SC 12; A:8 mm; d:12 mm; B:33 mm; S2:4,3 mm; F:30 mm; L:36 mm; G:25 mm; |
AMI MUCWTPL206-20W Take Up Unit Bearings | da - Cone Frontface Backing Diameter:1.36 in; Cup Part Number:17244-B; e - ISO Factor8:0.38; Cg - Geometry Factor11:0.0579; C1 - Cup Flange Width:0.1400 in; C90 - Dynamic Radial Rating (90 million revolutions)4:2520 lbf; D:2.4409 in; Cage Type:Stamped Steel; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:1650 lbf; d:1.1875 in; |
SEALMASTER ST-31 RM Take Up Unit Bearings | Bearing number:KGNS 16 C-PP-AS; H3:22 mm; Brand:INA; Basic dynamic load rating (C):1 kN; K3:5,3 mm; H8:21 mm; d:16 mm; D:26 mm; Weight:0,17 Kg; H2:22 mm; |
SEALMASTER USTA5000E-203-C Take Up Unit Bearings | Dimension H:125 mm; Note:This product line wa; Pillow/Plummer Block Style:Split Cylindrical Ho; Dimension H2:265 mm; Shaft Size:4 in; Housing Width:5.2 in; Ca - Axial Load Rating:3596.90 lbf; Support Type:Two-Bolt Plummer Blo; Bolt Size:2 x M24; Dimension L:410 mm; |
SEALMASTER USTA5000A-215 Take Up Unit Bearings Video